Junior B Series Filter Housings product photo Primary L

Junior B Series Filter Housings

To meet the increasing demand for small-scale filters for laboratory use and process development, Pall has developed the the Junior B series housings. These are some of the smallest stainless steel housings on the market yet can achieve very high-flow rates using specially developed Pall SBF-style pleated cartridges. For small-scale filtration this Junior range is less cumbersome than larger housings or difficult-to-use disc holders. All styles are suitable for in situ steam-sterilization in sterile processes.

Features and Benefits

Minimal size and weight makes these filter housings ideal for bench-top use, or for installing into processing equipment, for both gas and liquid filtration up to 10 bar (145 psi) operating pressure.
  • The electropolished crevice-free surfaces give maximum cleanliness for sterile processes. In situ steam-sterilization and steam autoclaving up to 140 °C (284 °F) can be employed
  • Housings are made of 316L stainless steel, and are therefore resistant to a wide variety of chemicals 
  • Maximizes product recovery, particularly important when filtering small-batch or high value products
  • Plug-in double O-ring cartridges in a selection of Pall filtration media are available to give maximum filtration quality, economy and performance for individual applications
  • Available in T-flow or inline styles with butt weld or sanitary inlet and outlet connections


Contact Us
* 需要的

描述

To meet the increasing demand for small-scale filters for laboratory use and process development, Pall has developed the the Junior B series housings. These are some of the smallest stainless steel housings on the market yet can achieve very high-flow rates using specially developed Pall SBF-style pleated cartridges. For small-scale filtration this Junior range is less cumbersome than larger housings or difficult-to-use disc holders. All styles are suitable for in situ steam-sterilization in sterile processes.

Features and Benefits

Minimal size and weight makes these filter housings ideal for bench-top use, or for installing into processing equipment, for both gas and liquid filtration up to 10 bar (145 psi) operating pressure.
  • The electropolished crevice-free surfaces give maximum cleanliness for sterile processes. In situ steam-sterilization and steam autoclaving up to 140 °C (284 °F) can be employed
  • Housings are made of 316L stainless steel, and are therefore resistant to a wide variety of chemicals 
  • Maximizes product recovery, particularly important when filtering small-batch or high value products
  • Plug-in double O-ring cartridges in a selection of Pall filtration media are available to give maximum filtration quality, economy and performance for individual applications
  • Available in T-flow or inline styles with butt weld or sanitary inlet and outlet connections

Applications

Applications

  • Small batches of biological and biochemical fluids
  • Filtration of gases for the electronics industry
  • A variety of processes requiring filtration of small flows of liquids or gases
  • Sterile air for small and medium fermentation systems
  • Sterile venting of small tanks and vessels

Specifications

Materials of Construction

Housing 316L stainless steel except the closure ring which is 431 stainless steel
Seal Material Ethylene Propylene
Vessel Closure Closure ring
Surface Finish Electro-polishing
Inlet and Outlet Connection Options 1 in. Sanitary flange
15 mm Butt weld
Vent Connection BTS Housing: Male Stäubli1
Drain Connection BTS Housing: Hose barb
BLS Housing: Hose barb
Design Code Designed and manufactured to Pall industrial standards which includes:
  • A minimum design capability of 5 x maximum operating pressure
  • Hydrostatically testing each unit to at least 1.5 x maximum operating pressure

Operating Conditions

  • Maximum Operating Pressure: -12 to 10 barg 
  • Maximum Operating and Steaming Temperature: 140 °C (284 °F)

Use with Steam: This housing may be steam-sterilized and used for steam filtration up to a temperature of 140 °C (284 °F). Operating limits for steam service may be influenced by filter cartridge specifications. Refer to appropriate literature for Pall filter cartridges.

Pressure Drop

The water flow and pressure drop characteristics refer to the empty housing only for water flow at 20 °C (68 °F). For other liquids multiply pressure drop by the relative density. The air flow and pressure drop characteristics refer to the empty housing only for air flow at 20 °C (68 °F). Flow rates relate to air (in Nm3/hour/scfm) at 2 bar gauge (3 bar (43.5 psi) absolute). Pressure drops for other pressures may be obtained by multiplying the figure taken from the bar gauge graph with the factor shown in the following table:
Working Pressure (Barg)3 1 2 3 4 5
Factor to Apply 1.50 1.00 0.75 0.60 0.50
Working Pressure (Barg) 6 7 8 9 10
Factor to Apply 0.42 0.37 0.33 0.30 0.2

To obtain the total pressure drop of a complete filter assembly, the cartridge pressure drop must be added. Please refer to the relevant filter cartridge literature or contact Pall.

Nominal Dimensions

BLS7001G23J BLS7001G22J BTS7001G23J
Dimension A 121 mm (4.76 in.) 218 mm (8.6 in.) 218 mm (8.6 in.)
Dimension B 64 mm (2.52 in.) 64 mm (2.52 in.) 64 mm (2.52 in.)
Dimension C 75 mm (2.95 in.) 75 mm (2.95 in.) 75 mm (2.95 in.)
Dimension D 49 mm (1.93 in.) 49 mm (1.93 in.) 49 mm (1.93 in.)
Dimension E - 66 mm (2.60 in.) 66 mm (2.60 in.)
Weight 1.3 kg (2.87 lbs) 1.3 kg (2.87 lbs) 1.3 kg (2.87 lbs)
Volume 0.1 L 0.1 L 0.1 L

BLS 7001 Housing


BTS 7001 Housing


 

1Stäubli is a registered trademark of Stäubli AG
2Full vacuum
31 bar = 14.5 psi.
41 bar = 14.5 psi, 1 Nm3/h = 0.59 scfm

Performance

Typical Liquid Flow Rates for BLS/BTS 7001 Housing*

Typical Air Flow Rates for BLS/BTS 7001 Housings*

* 1 bar = 14.5 psi, 1 Nm3/h = 0.59 scfm

Nominal Dimensions

BLS7001G23J  BLS7001G22J  BTS7001G23J 
Dimension A  121 mm (4.76 in.) 218 mm (8.6 in.) 218 mm (8.6 in.)
Dimension B  64 mm (2.52 in.) 64 mm (2.52 in.) 64 mm (2.52 in.)
Dimension C  75 mm (2.95 in.) 75 mm (2.95 in.) 75 mm (2.95 in.)
Dimension D  49 mm (1.93 in.) 49 mm (1.93 in.) 49 mm (1.93 in.)
Dimension E  66 mm (2.60 in.) 66 mm (2.60 in.)
Weight  1.3 kg (2.87 lbs) 1.3 kg (2.87 lbs) 1.3 kg (2.87 lbs)
Volume 0.1 L 0.1 L 0.1 L

BLS 7001 Housing

BTS 7001 Housing

Segments

Housings, Beer (Craft/Micro Breweries), Beer (Corporate), Housings

Type

Housings, Vessels, or Assemblies

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: B L S7001G 22 J(See bold references in tables below)

Part Number: B < Housing Code from Table 1 > S7001G < Inlet/Outlet Code from Table 2 > J

Table 1 - Housing Type

Code Housing Type
L In-Line
T T-flow
Housings use Pall SBF1 style filter cartridges, and are supplied without cartridges

Table 2 - Inlet and Outlet

Code Inlet and Outlet
22 15 mm Butt weld
23 1 in. sanitary flange

检查

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.