描述
Claris filter cartridges are general purpose melt blown depth filters that deliver consistent, reliable filtration at the lowest possible cost.
Multiple fiber zones created by a proprietary and highly automated melt-blowing process result in a consistent and graded pore structure. The different pore sizes allow for the efficient capture of various sized particles and maximum usage of the filter's depth.
An innovative extruded core provides a low cost alternative to molded cores, without compromising filter strength or media depth.
Combined, these features provide long life, less filter changeouts, and the most cost-efficient solution for general particle reduction applications within the food and beverage industry.
| Features | Benefits |
| Melt blown depth media with graded pore structure | Efficient capture of various particle sizes, maximizing the usage of the entire filter's depth |
| Thermally bonded fibers | Consistent filtration performance |
| High void volume | Long service life due to high dirt holding capacity |
| High strength extruded core | Enables economy without compromising flow or cartridge stability Eases disposal and incineration |
| All polypropylene construction, without adhesives, binders or surfactants | Broad chemical compatibility, suitable for use in a variety of fluids |
Quality
- Cartridges produced in a controlled environment
- Manufactured within a Quality Management System certified to ISO 9001:2008
Food Contact Compliance
Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.
Specifications
Materials of Construction
| Component | Description |
| Filter Medium | Polypropylene |
| Core, Fin End and End Cap | Polypropylene |
| SOE Style Cartridges only | |
| Adaptor | Polypropylene |
| O-ring Seal | Silicone Elastomer Ethylene Propylene Rubber |
Operating Characteristics in Compatible Fluids1
| Maximum Differential Pressure2 | Operating Temperature |
| 1.72 bard (25 psid) | 60 °C (140 °F) |
| 3.45 bard (50 psid) | 20 °C (68 °F) |
1Fluids which do not swell, soften, or adversely affect any of the filter components
2Recommended change-out differential pressure is 2.4 bard (35 psid), provided the maximum differential pressure (based on temperature) is not exceeded.
Performance
Flow Rates 3
3 Typical initial clean Δp for a 254 mm (10 inch) cartridge, clean water at 20°C (68 °F). For liquids with viscosity greater than 1 cp, multiply the Δp by the viscosity.
Segments
Type
Ordering Information
This information is a guide to the part numbering structure and possible options. For availability of specific options, please contact Pall. Refer to Pall for housing details.
Part Number: CLR [Table 1] [Table 2] [Table 3] W [Table 4] 480
Example Part Number: CLR510M7WS480 See bold reference codes in tables.
Table 1: Removal Rating
| Code | Description |
| 1 | 1 μm |
| 3 | 3 μm |
| 5 | 5 μm |
| 10 | 10 μm |
Table 2: Length
| Code | Description |
| DOE Style only: | |
| 5 | 127 mm (5") |
| 975 | 248 mm (9.75") |
| 9875 | 251 mm (9.875") |
| 10 | 254 mm (10") |
| 195 | 495 mm (19.5") |
| 20 | 508 mm (20") |
| 2925 | 743 mm (29.25") |
| 295 | 749 mm (29.5") |
| 30 | 762 mm (30") |
| 39 | 991 mm (39") |
| 40 | 1016 mm (40") |
| 50 | 1270 mm (50") |
| SOE Style only: | |
| 10 | 254 mm (10") |
| 20 | 508 mm (20") |
| 30 | 762 mm (30") |
| 40 | 1016 mm (40") |
Table 3: Adaptor
| Code | Description |
| blank | DOE with no endcaps |
| M3 | SOE - single open end with flat closed end and external 222 O-rings |
| M6 | SOE - single open end with flat closed end, 2 locking tabs and external 226 O-rings |
| M7 | SOE - single open end with fin end, 2 locking tabs and external 226 O-rings |
| M8 | SOE - single open end with fin end and external 222 O-rings |
Table 4: O-ring Seal Material4
| Code | Description |
| S | Silicone Elastomer |
| E | Ethylene Propylene Rubber |
4 For M3, M6, M7 and M8 styles only
检查
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
