1. 首页/
  2. Microelectronics/
  3. Display/
  4. Ultipleat High FLow Filters
Ultipleat High FLow Filters product photo Primary L

Ultipleat High FLow Filters

The Ultipleat® High Flow filter is suited for TFT LCD wet processes, such as wet etching and cleaning. Its large diameter, inside out flow path and unique, high area, pleated construction allow for a long service life. The filter is very economical due to its high flow capacity. Far fewer filters are thus required, compared to standard size cartridges.

Features and Benefits

  • Large filter diameter, 160 mm / 6.3 in. nominal, equates to fewer cartridges and smaller housing footprint
  • Easy filter change-out
  • 526 mm / 20 in. lengths available
  • High area, pleated construction for low differential pressure and high dirt capacity
  • Long service life time
  • Inside out flow pattern further enables high flow rates
了解更多


Contact Us
* 需要的

描述

The Ultipleat® High Flow filter is suited for TFT LCD wet processes, such as wet etching and cleaning. Its large diameter, inside out flow path and unique, high area, pleated construction allow for a long service life. The filter is very economical due to its high flow capacity. Far fewer filters are thus required, compared to standard size cartridges.

Features and Benefits

  • Large filter diameter, 160 mm / 6.3 in. nominal, equates to fewer cartridges and smaller housing footprint
  • Easy filter change-out
  • 526 mm / 20 in. lengths available
  • High area, pleated construction for low differential pressure and high dirt capacity
  • Long service life time
  • Inside out flow pattern further enables high flow rates

Specifications

Materials of Construction

Filter Medium Polypropylene
Support/Drainage Polypropylene
Endcaps Glass filled polypropylene
O-ring PTFE encapsulated fluoroelastomer

Removal Ratings 2.0 μm
Diameter (nominal) 160 mm / 6.3 in
Length (nominal) 526 mm / 20.7 in
Maximum Operating Temperature 82 °C / 180 °F
Maximum Forward Differential Pressure1 3.45 bar (50 psid) up to 50 °C (122 °F)

1 For fluids compatible with the filter element at the stated temperature.


Typical Flow Charcteristics – 1 cP fluid, 20 ºC

Cartridge Grade Removal Rating Element Pressure Drop2
PP020 2.0 μm 1.48 mbar/m3/h
0.489 psid/100 gpm

Segments

Display, Display

Type

Filter Cartridges

Ordering Information

Part Numbers / Ordering Information

Part Number Removal Rating
620HFPP020H1 2.0 μm

2 Pressure drop in psid per US gpm and mbar per cubic meter per hour for the cartridge length shown. Multiply this value by the total system flow to determine the aqueous pressure drop. Next for fluids other than water, multiply this value by the fluid’s viscosity at the operating temperature in centipoise. This value is the pressure drop across the Ultipleat® High Flow filter(s) only; it must be added to the pressure drop due to the Ultipleat® High Flow filter housing.

Unit conversion: 1 bar = 100 kilopascals

检查

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.